I've tried some other bench top spindle sanders and had to move up from a piece of junk that I've been using for the past couple of years.
I wanted a bigger table, smoother action from the sanding spindle, and a smoother surface to work on.Additionally, I wanted a dedicated tool on its own stand.I spend a lot of time at the spindle sander. I wanted a comfortable and rock steady station to work.
After looking at what was available, my choice came down to this unit and one made by Grizzly.After looking very closely at the pictures and manuals offered by both companies, I decided that these were very likely made by the same company in China.There are virtually no differences that can be determined.... except one.The Jet's table is rounded on the corners.I envisioned pemanent bruises on my hips from running into sharp corners of the Grizz.
I own several Jet and Delta tools.I like working with tools that are well finished, that have a surplus of power for the job, that have smooth and flat work surfaces, and look good.I have customers in my shop all the time, so appearances mean a lot.
So, for the looks and rounded top corners, I decided to spend the extra couple hundred for the Jet.I am not dissapointed.The work surface has been machined flat and sanded smooth.It has the nicest surface of any machine in my shop.
The unit came fully assembled.All I had to do was to remove the protective gunk that prevents rust from the table top and install the sleeves on the spindles.The manual is nicely prepared in B&W and has good pictures to illustrate the points being made.The manual is also pleasantly short yet covers all significant details.
The spindle action is smooth and quiet. There is plenty of power to quickly remove material but it is easy to control as well.The result is you'll have exceptional control when removing material. I hooked up my dust collection and with only 650 CFM, it pulls most all the dust very well.I'm very impressed with the operation of the tool.It is truly the nicest OSS that I've used.
The machine comes with a full assortment of different sized spindles of 60 grit paper.I practically never use 60 grit for my projects.I've found that sanding spindles are available from Southern Tool and from Grizzly.I've got some on order for the sizes and grits I use most.It also has a 4 inch spindle.This is great for sanding straight edges or large arcs.
One nit that I have is that there are two shelves for spindle storage, one mounted on each side of the cabinet. The holes in these shelves accomodate the smaller spindles well enough.But the larger spindles have large nuts on the bottom and don't fit in the smaller holes. They keep tipping or even fall out when I move the tool around.
Other than the silly thing with the spindle storage, I feel that this tool is of the highest quality. I am very happy with this purchase and highly recommend the tool for anyone who needs a spindle sander.
Click Here to see more reviews about:
JET 708411 JOVS-10 5-1/2 Inch Oscillating Vertical Spindle Sander 115-Volt 1-PhaseProduct Description: The Jet 708411 JOVS-10 Oscillating Vertical Spindle Sander, 1 HP, 115-Volt, Single Phase is loaded with the features that make it an ideal finshing machine for your shop. A sturdy one-piece steel, closed stand houses the powerful, independently mounted, 1HP motor that drives the 1-1/2-inch oscillating drum at a consistent 1725RPM. The Jet 708411 sander comes standard with with a complete set of 10 spindles and abrasive sleeves from 1/4-inch to 4-inch so you can jump right into that next project. Features:4-inch dust port connects to your dust collection system to keep your work area clean Worm and gear mechanism runs in an oil bath to prolong its life and durability Industrial push-button switch is conveniently located for finger-tip control Table tilts to 45 degrees to accommodate bevel sanding projects Built-in storage racks keep spindles and table inserts handy Sturdy one-piece steel stand provides support and stability Spindles have threaded ends for quick, easy changesWhat's In The Box:Jet 708411 JOVS-10 Oscillating Vertical Spindle Sander, 1 HP, 115-Volt, Single Phase Set of 10 spindles and abrasive sleeves from 1/4-inch to 4-inch
Buy cheap JET 708411 JOVS-10 5-1/2 Inch Oscillating Vertical Spindle Sander 115-Volt 1-Phase now Get 23% OFF
When I received this product the vacuum hose attachment was not included.I contacted the company the next business day and explained that the picture of the product on the amazon site showed the attachment.The customer service rep checked and stated that the attachment was not included.I now must find the attachment to use the product.
